Before you receive your unit there are a few things we recommend you have ready.
What | Why |
Paper Towels | Wiping bath when empty and general cleaning. |
Micro Fibre Cloths | To Polish bath when empty and general cleaning |
Sodium Bicarbonate | To clean around and to remove body fat from the water line |
Wet Vac |
For removing the last of the water when emptying *Not essential but can save help to save you time |
Spa Vac |
For removing debris from the bath base and pre filter |
Small Bucket | To catch water when removing filters, cleaning the first stage filter |
A small brush/pipe cleaner brush | For cleaning first stage filters such as the bottom drain and skimmer basket |
System Flush | For monthly maintenance. Speak to your local supplier for their recommendation - it needs to be a product that eliminates bio-film and the build up of fats and grease in the pipework. |
Chemical to Dose |
Sodium Hypochlorite Strength can be 11-12% or 14-15% This is the chlorine needed to dose the water. |
Sulphuric Acid Strength should be no more then 16%. This is needed to control the PH |
|
Filter Cleaning Solution |
This is only required if you intend on reusing cartridge filters (if so, you will need an additional buck for them to sit in) (N/A to Spa or Media Filter products) |
Spare Filters | 20" 50 micron filters - these can be bought from Brass Monkey or you can speak to your local supplier. (N/A to Spa or Media Filter products) |
Digital Water Tester |
There are many options to choose from, For daily water testing. We recommend the HI-97710c - Most accurate and can be calibrated by the user. You will need the reagents HI -93701-T to go with this for testing. |
Filter housing key |
This is supplied by Brass Monkey and comes (N/A to Spa or Media Filter products) |
Paper towels |
Wiping bath when empty and general cleaning. |
Bottom drain |
This is used for the removal |
Centring ring |
This is supplied by Brass Monkey (N/A to Spa or Media Filter products) |
Top Filter Bung |
This is supplied by Brass Monkey and is used to cover the top filter of a barrel/ bottom of the skimmer to prevent air being sucked when back washing. |
TwistIIclean |
This is used for the removal of the filter (N/A to Spa or Media Filter products) |