The easiest way to control your bath is using the Brass Monkey app
Download the app: brassmonkey.co.uk/app
Connecting your barrel to the app
Once you've downloaded the app, follow the steps to add your barrel. You'll need to access QR code shown in the compartment area for this.
To control your barrel via the app, it will need to be connected to wifi. You'll be guided through how to do this in the setup steps on the app.
Changing the temperature
Use the main dial to set the target temperature. The centre of there dial shows the target temperature and underneath the current temperature of your bath. If the target temperature is lower than the current temperature, the chiller will start cooling. When it reaches temperature the dial with display Ready and stop cooling.
Starting a dip session
When you wish to dip, simply hit Start Dip. This will turn off the chiller and turn on the light in your barrel for 15 minutes. 1 minute before the dip session ends the lights will begin to flash to let you know the pump is coming back on. While in a dip session the app will display Ready to dip.
Setting a schedule
Setting a schedule to enjoy a dip at the temperature you like on the day and time of your choosing. Using scheduling also means only using energy to cool its needed.
Access scheduling from the Quick Actions or left side draw. Here you can choose the days you wish to dip and a dip session window length (up to 2 hours).
Maintenance
In the left side draw you can access key maintenance information, including a handy tool to remind you when it's time to change your particle filter or change the water.
User Guides
In the left side draw, you'll also find plenty a list of User Guides