PRO Range Guidance
      Back to home
      1. Knowledge Base
      2. PRO RANGE
      3. PRO Range Guidance

      PRO RANGE: Warning Lights

      Standard Operating Procedures

      Applicable to Chill and Ice Engine Products 

      LED ON Normal Operating

      Engine and Pump are on, the unit is either at idle state or cooling to target temperature
      LED Flashing
      1 flash
      1 second gap 
      1 flash      		 Maintenance Mode

      Engine and the pump are off. This is to allow for maintenance tasks to be completed. The unit will stay in this mode until maintenance mode is re-pressed on the control panel.
      LED Flashing
      Quick flash on and off      		 Back Wash Mode Engine is off , pump is on.
      The pump keeps kept on to allow for back washing of filtration
       

      Issue Status 

      *Applicable to chiller engines only. (Pro Chill Plunge and Pro Barrel) 

      Please contact the support team to confirm what action is required 

      Brassmonkey.co/support 

      LED Flashing
      1 flash 
      5 Second Gap 
      1 Flag

      		 No Flow 

      Water is unable to flow through the chiller unit

      LED Flashing
      3 flashes
      5 second gap
      3 flashes

      		 Frost Protection

      The water flowing through bath/barrel is approaching freezing points. Take action to protect your chiller engine.

      LED Flashing
      5 flashes 
      5 second gap 

      5 flashes

      		 Overheat

      Your chiller is overheating. Take action to help cool it down

      LED Flashing
      10 flashes
      5 second gap
      10 flashes

      		 Lock Out

      Your chiller has ‘locked - out’ to protect itself